, , ,

Cylindrospermopsin Detection Kit (Rapid – Recreational Water)

$247.00

 

  • Screening of Cylindrospermopsin in water samples at or above 30ppt
  • Format: 15 tests (5 samples at 2 dilutions/5 controls)
  • Syringe
  • Sample Filter
  • Sample Dilution Buffer
  • Water Collection Bottle
  • Water Collection Tube
  • 200ul fixed volume pipette
  • Water Sample Bottle
  • Negative control
247247
Sample Dilution Buffer
Optional extra sample buffer for this rapid test kit. Your kit already includes enough buffer for its tests; add a 5 or 10 pack if you need to dilute samples that read above the kit's range, re-run samples, or keep spare buffer on hand for field work.
$60.00
$100.00
Addons Price: $0.00
Total Price: $247.00
- +

The Cylindrospermopsin Detection Kit (Rapid – Recreational Water) is a field-ready cylindrospermopsin test kit for screening lakes, reservoirs and other recreational or source waters at 30 ppt (parts per trillion). It includes the syringes, debris filters, collection tubes and sample bottles needed to go from a water sample to a result on site, with no lab equipment required.

Each kit contains 15 lateral flow cassettes: 5 samples tested undiluted and at a 10-fold dilution, plus 5 negative controls. Each cassette develops in 30 minutes.

Key Features

  • Screening level: a test line lighter than the negative control indicates 30 ppt or more. No visible test line indicates 1 ppb or more.
  • Two-dilution format: each sample is run undiluted and at 10-fold. The manual lists intended screening levels of 30 ppt and 3,000 ppt.
  • Run time: 30 minutes per cassette.
  • Field-ready: sample filtering and measuring supplies are included. You only need a timer and a marker.
  • Sample types: freshwater recreational water, source water and drinking water.
  • Room-temperature storage: store at 2–30 °C, with cassettes sealed until use.

What’s in the Kit

Each cylindrospermopsin test kit includes:

  • 15 Cylindrospermopsin lateral flow cassettes (individually foil-pouched with desiccant)
  • 5 Syringes
  • 5 Sample debris filters
  • 5 Sample Dilution Buffer tubes (undiluted run)
  • 5 10-fold Sample Dilution Buffer tubes
  • 5 Negative Control tubes
  • 5 Water collection tubes and 5 sample collection tubes
  • 5 Fixed-volume 200 µL pipettes
  • Water sample bottles (125 mL)

You will also need: a timer and a marker for labeling. Testing in a lab with your own pipettes and collection bottles? The Cylindrospermopsin Detection Kit (Rapid – Freshwater Streams and Source Water) uses the same screening levels without the field collection supplies.

Who It’s For

  • Lake, reservoir and park managers checking swimming and boating areas during bloom season
  • State, tribal and local water quality programs responding to harmful algal bloom reports
  • Field crews and consultants who need results at the shoreline
  • Researchers surveying cyanotoxins across multiple sites

How to Use the Cylindrospermopsin Test Kit

  1. Wearing gloves, collect water into the 125 mL sample bottle. Refrigerate up to 5 days or freeze for longer storage, and bring the kit and samples to room temperature before testing.
  2. Run the negative control first: use the syringe to transfer 200 µL (0.2 on the syringe) from the Negative Control tube into a cassette and start a 30-minute timer.
  3. Draw 1 mL of sample into the syringe, attach the debris filter and push the filtered water into the sample collection tube. Repeat with a second 1 mL.
  4. Undiluted run: with the fixed-volume pipette, add 200 µL of filtered sample to the Sample Dilution Buffer tube, mix 3 times, and apply to a cassette through the syringe and filter as the manual directs. Start a 30-minute timer.
  5. 10-fold run: repeat with the 10X Sample Dilution Buffer tube and a fresh cassette.
  6. Read each cassette within 5 minutes after the run is complete.

Full instructions are in the AU2058 product manual (PDF).

Reading Your Results

  • Test line as dark as or darker than the negative control’s test line: below the limit of detection
  • Test line lighter than the negative control’s test line: 30 ppt or more
  • No test line (control line only): 1 ppb or more

A visible control line is required for a valid result. Account for the dilution factor when interpreting the 10-fold run. For semi-quantitative estimates in the 0–1 ppb range, run cylindrospermopsin standards at the same time as your samples.

About Cylindrospermopsin

Cylindrospermopsin is a tricyclic alkaloid cyanotoxin of about 415 Da produced by certain cyanobacteria, including Cylindrospermopsis raciborskii. It is very water soluble and can remain in the water column after a bloom fades.

The EPA 10-day drinking water health advisories are 0.7 µg/L (700 ppt) for bottle-fed infants and preschool children and 3.0 µg/L (3,000 ppt) for school-age children through adults. The product manual cites a draft EPA recreational water quality criterion of 8 µg/L; EPA’s final 2019 recreational criterion is 15 µg/L. Check with your state agency for current advisory levels.

Frequently Asked Questions

How sensitive is the cylindrospermopsin test kit?

It screens at 30 ppt. If no test line appears on the undiluted run, the sample contains 1 ppb or more.

How many samples can I test?

Five. Each sample uses three cassettes: one undiluted, one 10-fold diluted and one negative control.

Do I need lab equipment?

No. The cylindrospermopsin test kit includes syringes, filters, collection tubes and fixed-volume pipettes. You only need a timer and a marker.

Is this a quantitative test?

No. Results are preliminary and qualitative. Confirm samples that need action with the Cylindrospermopsin ELISA Kit (EL2047) or another analytical method such as HPLC.

What other algal toxin tests are available?

See the Microcystin Test Kit (Rapid – Recreational Water), the Anatoxin-a Detection Kit and the SPATT Bag Set for passive monitoring.

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

tests

5 tests, 20 tests

You may also like…

Shopping Cart