, , ,

Saxitoxin Rapid Test Kit for Freshwater – Lateral Flow

$269.00

  • Screening of saxitoxin in freshwater samples at a screening level of 100 ppt (0.1 µg/L)
  • Format: 10 cassettes (5 sample + 5 negative control)
  • Water sample bottles (125 mL) provided
  • Run time: 30 minutes
  • Read by eye or with the DETEKT lateral flow reader
  • For Research Use Only
269269
Sample Dilution Buffer
Optional extra sample buffer for this rapid test kit. Your kit already includes enough buffer for its tests; add a 5 or 10 pack if you need to dilute samples that read above the kit's range, re-run samples, or keep spare buffer on hand for field work.
$60.00
$100.00
Addons Price: $0.00
Total Price: $269.00
- +

The Saxitoxin Rapid Test Kit for Freshwater – Lateral Flow is a saxitoxin water test that screens streams, lakes, reservoirs, source water and recreational water at 100 ppt (0.1 µg/L) in 30 minutes. It is built for field use: each sample is taken up with a fixed-volume transfer pipette, mixed with Sample Dilution Buffer and added to a cassette, with no pipettor or power needed.

The kit tests 5 samples. Each sample is read against its own negative control cassette, for 10 cassettes per kit. Results can be read by eye or with a DETEKT lateral flow reader.

Key Features

  • Screening level: 100 ppt (0.1 µg/L) saxitoxin, below the WHO drinking water and recreational guideline values. No visible test line indicates 50 ppb or above.
  • Run time: read each cassette at 30 minutes, and no later than 35 minutes.
  • Field-ready: transfer pipettes, buffer and 125 mL sample bottles are included. You only need a timer, gloves and a marker.
  • Reader compatible: DETEKT RDS-2500 readers supplied by Attogene carry a dedicated saxitoxin program, with cut-offs that can be tailored to your requirements.
  • Room-temperature storage: 18-month shelf life from the date of manufacture.
  • Format: 10 cassettes (5 sample + 5 negative control).

What’s in the Kit

Each saxitoxin water test kit includes:

  • 10 Saxitoxin cassettes, each in a foil pouch with desiccant
  • 5 tubes of Sample Dilution Buffer (10X), 22 µL per tube
  • 5 tubes of Negative Control, 200 µL per tube
  • 5 Fixed-volume transfer pipettes, 200 µL
  • 5 Water sample collection bottles, 125 mL
  • Manual

You will also need: a timer, disposable gloves and a permanent marker. A positive control is not supplied.

Add-ons: extra Sample Dilution Buffer (10X), part number PN2194-1, is available above in a 5 pack or 10 pack. This buffer is not interchangeable with the buffer in the Saxitoxin Lateral Flow Kit for Shellfish.

Who It’s For

  • Drinking water utilities monitoring source water during cyanobacterial blooms
  • Lake, reservoir and recreation managers responding to harmful algal bloom reports
  • State, tribal and local water quality programs that need a fast on-site screen
  • Researchers studying saxitoxin-producing cyanobacteria in freshwater

How to Use the Saxitoxin Water Test

  1. Wearing gloves, collect each sample into a labeled 125 mL bottle. Refrigerate at 2–8 °C for up to 5 days, or freeze for longer storage.
  2. Bring the cassettes, buffer, Negative Control and samples to room temperature. Lay two cassettes flat per sample and label them.
  3. Negative control first: transfer 200 µL of Negative Control into the sample port of the control cassette, all at once, and start the timer.
  4. Tap the Sample Dilution Buffer tube so the buffer is at the bottom. With the same transfer pipette, add 200 µL of sample and mix by pipetting 3 times.
  5. Add 200 µL of the buffered sample to the sample cassette, all at once, and note the time.
  6. Leave both cassettes flat and undisturbed. Read each one 30 minutes after its liquid was added, side by side under the same light.

Full instructions are in the AU2057 product manual (PDF).

Reading Your Results

This is a competitive immunoassay, so a weaker test line means more saxitoxin. Always compare the sample’s test line (T) with the test line of its negative control.

  • Invalid: no control line (C) on either cassette. Repeat with new cassettes.
  • Negative: sample T line as strong as or stronger than the negative control. No saxitoxin detected (below 100 ppt).
  • Low positive: sample T line visible but lighter than the negative control. 100 ppt or above, below about 50 ppb.
  • Positive: no T line, only the C line. 50 ppb or above.

The control line is faint on negative samples and grows stronger as saxitoxin increases. A faint control line is normal as long as it is visible. With a reader, a lower T/C ratio than the negative control indicates saxitoxin.

How It Works and Cross-Reactivity

As the sample flows along the strip, it picks up 40 nm colloidal gold coated with an anti-saxitoxin monoclonal antibody. The test line carries a saxitoxin–BSA conjugate. Saxitoxin in the sample occupies the antibody, so less gold binds the test line. The control line captures gold that passes the test line, so a control line forms on every cassette that ran correctly.

The antibody responds strongly to saxitoxin (STX), moderately to gonyautoxins GTX2/3 and weakly to GTX1/4, with little or no response to neosaxitoxin (neoSTX), GTX5 and GTX6. The test therefore does not measure total paralytic shellfish toxins as STX equivalents.

About Saxitoxin

Saxitoxins are naturally occurring alkaloid neurotoxins of about 300 Da, produced by some marine dinoflagellates and by strains of several freshwater cyanobacteria. The WHO guideline values are 3 µg/L in drinking water and 30 µg/L in recreational water (WHO, 2020). Some US states use lower drinking water advisories, such as Washington State’s provisional 0.2 µg/L.

Frequently Asked Questions

How sensitive is the saxitoxin water test?

The screening level is 100 ppt (0.1 µg/L), both by eye and with a lateral flow reader. A missing test line indicates 50 ppb or more.

Can I estimate concentration?

Yes, approximately. Run saxitoxin standards of known concentration in saxitoxin-free freshwater alongside your samples. This works from 0 to about 20 ppb. Dilute higher samples and multiply by the dilution factor.

How should positive results be confirmed?

Confirm positives, and any result used for a regulatory decision, by ELISA, HPLC or LC-MS/MS. The Saxitoxin (PSP) ELISA Kit (EL2048-02) can be used for confirmation.

Can I use this kit for shellfish?

No. This saxitoxin water test is for freshwater. For shellfish, use the Saxitoxin Lateral Flow Kit for Shellfish (AU2057-01), which includes extraction materials.

What if the sample flows slowly?

Clogging has not been observed, even with algae-rich samples. If flow is slow, centrifuge the sample or pass it through a syringe filter (not supplied) and test the clear liquid.

What other freshwater toxin tests do you offer?

See the Microcystin Test Kit (Rapid – Recreational Water) and the SPATT Bag Set for passive monitoring.

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

 

AU2057_Saxitoxin Rapid Water Instructions

Kit format

10 cassettes (5 sample + 5 negative control)

You may also like…

Shopping Cart