, ,

Cylindrospermopsin ELISA Kit

$511.00

  • Format: 96-well microtiter plate (12 test strips of 8 wells)
  • Standards: 0 | 0.03 | 0.1 | 0.2 | 2 ppb
  • Incubation Time: 75 Minutes
- +

The Cylindrospermopsin ELISA Kit (EL2047-02) is a competitive cylindrospermopsin ELISA kit for the quantitative analysis of cylindrospermopsin in water and wastewater, with a 0.03 ppb detection limit. It runs in a 96-well plate format with five standards from 0 to 2 ppb plus a 0.4 ppb positive control, and a total incubation time of 75 minutes.

Cylindrospermopsin is a toxin produced by several cyanobacteria (blue-green algae) during harmful algal blooms. EPA has issued drinking water health advisories and recreational criteria for it, so sensitive quantitative testing matters for source water and recreational water monitoring.

Key Features

  • Detection limit: 0.03 ppb in water and wastewater.
  • Standard curve: standards at 0, 0.03, 0.1, 0.2 and 2 ppb, plus a 0.4 ppb positive control.
  • Cross-reactivity: cylindrospermopsin 100%, 7-epi-cylindrospermopsin 153%, 7-deoxy-cylindrospermopsin 126%, microcystin-LR and nodularin less than 1%.
  • Assay time: 30 + 30 + 15 minutes of incubation, 75 minutes in total.
  • Accuracy and precision: 80 ± 10% accuracy in water and wastewater; CV less than 10%.
  • Simple washing: wells are washed with deionized or distilled water, so no wash buffer needs to be prepared.
  • Format and storage: 96-well plate of 12 strips × 8 wells; store at 2–8 °C away from light, 12-month shelf life.

What’s in the Kit

Each cylindrospermopsin ELISA kit includes:

  • Microtiter plate with 96 wells coated with cylindrospermopsin
  • Cylindrospermopsin standard solutions, 5 vials × 0.8 mL: 0, 0.03, 0.1, 0.2 and 2 ppb
  • Cylindrospermopsin Positive Control, 1 vial × 0.8 mL, 0.4 ppb
  • Cylindrospermopsin Antibody #1, 11 mL
  • 100X HRP-Conjugated Antibody #2, 0.25 mL, and Antibody #2 Diluent, 20 mL
  • TMB Substrate Solution, 12 mL
  • Stop Solution, 14 mL

You will also need: an ELISA plate reader (450 nm/630 nm), deionized or distilled water, a vortex mixer, a timer, a wash bottle, absorbent material, 50 mL and 2 mL polystyrene centrifuge tubes, micropipettes covering 20–200 µL and 100–1000 µL, and a 300 µL multichannel pipette.

Who It’s For

The kit suits drinking water utilities, wastewater operators, environmental and contract laboratories, and researchers who monitor cyanotoxins in lakes, reservoirs and source water.

How to Use the Cylindrospermopsin ELISA Kit

Bring all reagents and microwells to room temperature (20–25 °C) for at least 30 minutes, and run standards and samples in duplicate.

  1. Prepare samples: water samples should be free of particles and adjusted to neutral pH. Centrifuge or filter if necessary.
  2. Prepare the conjugate: freshly dilute the 100X HRP-Conjugated Antibody #2 1:100 in Antibody #2 Diluent and vortex 10 seconds.
  3. First incubation: add 50 µL of standard, positive control or sample, then 100 µL of Antibody #1. Shake 30 seconds, cover and incubate 30 minutes at room temperature.
  4. Wash: decant and rinse each well 4 times with 250 µL of deionized or distilled water, then tap dry on absorbent paper.
  5. Second incubation: add 150 µL of 1X HRP-Conjugated Antibody #2, shake, cover and incubate 30 minutes. Wash again as above.
  6. Develop, stop and read: add 100 µL of TMB Substrate Solution and incubate 15 minutes at 25 °C, covered. Add 100 µL of Stop Solution and read at 450 nm within 5 minutes.

Full instructions are in the EL2047-02 kit manual (PDF).

How It Works and Reading Results

Cylindrospermopsin in the sample competes with cylindrospermopsin antigen on the plate for the antibody. More toxin means less bound antibody and a lighter blue color, so absorbance falls as concentration rises.

Express each mean absorbance as a percentage of the zero standard (B/B0 × 100) and plot it against concentration on a semi-logarithmic scale. Read sample values from the curve and multiply by any dilution factor. If a sample is lighter than the 2 ppb standard, dilute it to fit the 0.03–2 ppb range and rerun. A zero-standard absorbance below 0.5 suggests a reagent problem.

Guideline values for context: EPA’s 10-day drinking water health advisory is 0.7 µg/L for bottle-fed infants and preschool children and 3.0 µg/L for school-age children and adults; the EPA recreational swimming advisory (2019) is 15 µg/L. The kit’s 0.03 ppb detection limit is well below these values.

Frequently Asked Questions

How sensitive is the cylindrospermopsin ELISA kit?

The detection limit is 0.03 ppb in water and wastewater, with a working range of 0.03 to 2 ppb.

Does it detect cylindrospermopsin analogs?

Yes. 7-epi-cylindrospermopsin and 7-deoxy-cylindrospermopsin react at 153% and 126%. Microcystin-LR and nodularin react at less than 1%.

Do I need to prepare a wash buffer?

No. This kit uses deionized or distilled water for all wash steps.

Is there a field test or a genetic test?

For field screening, see the cylindrospermopsin rapid test kit. To detect the toxin-producing CyrJ gene, see the Cylindrospermopsin qPCR Detection Kit.

Can I test for microcystins as well?

Yes, with a separate kit. The Microcystin ELISA Kit uses the same plate format, and the Congener-Independent Microcystin/Nodularins ELISA Kit measures total microcystins in drinking and ambient water.

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

size

96 reactions

You may also like…

Shopping Cart