,

Vitamin B12 ELISA Kit

$473.00

Highly Sensitive, rapid, robust screening kit for Vitamin B12

- +
SKU: EL2013-01 Categories: , Tags: , ,

The Attogene Vitamin B12 ELISA Kit (catalog EL2013-01) is an indirect competitive enzyme immunoassay for quantitative and qualitative analysis of vitamin B12 (cobalamin) in research samples. Each kit provides a 96-well antigen-coated microtiter plate, five standards from 0 to 5.4 ppb and the reagents needed to run the assay and read it at 450 nm. Overall test sensitivity is 0.2 ppb, with a coefficient of variation (CV) below 10%.

Vitamin B12 is a water-soluble vitamin involved in DNA synthesis and in fatty acid and amino acid metabolism. This kit measures it in fresh milk, milk powder and milk products without a full instrumental workflow.

Key Features

  • Indirect competitive format: vitamin B12 in the sample competes with antigen coated on the plate for a limited amount of antibody, so absorbance falls as concentration rises.
  • Sensitivity: overall test sensitivity of 0.2 ppb, with matrix detection limits down to 0.2 ppb in fresh milk.
  • Ready-made standards: 0, 0.2, 0.6, 1.8 and 5.4 ppb, plus a 1 ppm spiking standard solution.
  • Short sample preparation: fresh milk is assayed directly; milk products and milk powder need only dilution with the supplied extraction solution.
  • Standard plate reader: read at 450 nm, with dual-wavelength 450/630 nm recommended.

What’s in the Kit

Each Vitamin B12 ELISA kit includes:

  • Microtiter plate, 96 wells coated with antigen
  • Standard solutions: 0, 0.2, 0.6, 1.8 and 5.4 ppb (5 x 1 mL)
  • Spiking standard solution, 1 ppm (1 mL)
  • Enzyme conjugate (12 mL)
  • Antibody solution (7 mL)
  • Substrate solution A (7 mL) and substrate solution B (7 mL)
  • Stop solution (7 mL)
  • 20X concentrated wash solution (40 mL)
  • Extraction solution (50 mL)

Kit size is listed as 50 reactions on one 96-well plate; the manual recommends running all standards and samples in duplicate. Store the kit at 2–8 °C and do not freeze. Storage period is 12 months.

You will also need: an ELISA plate reader (450/630 nm), micropipettes (20–200 µL and 100–1000 µL) and a 300 µL multichannel pipette, a vortex mixer, shaker, centrifuge, analytical balance, 2 mL and 50 mL polystyrene centrifuge tubes, sodium chloride (for the 10% NaCl solution used with milk powder) and deionized water.

Who It’s For

  • Food and nutrition research groups measuring cobalamin in dairy samples
  • Dairy and ingredient QC labs screening batches before instrumental confirmation
  • Academic labs studying how processing affects vitamin B12 content

How to Use the Vitamin B12 ELISA Kit

The steps below summarize the protocol. Follow the full instructions in the Vitamin B12 ELISA kit manual (PDF).

  1. Prepare samples. Fresh milk: use 50 µL directly. Milk products: mix 50 µL with 450 µL extraction solution, vortex 30 s and use 50 µL of the supernatant. Milk powder: shake 1.0 g with 4 mL of 10% NaCl for 30 min, mix 100 µL with 400 µL extraction solution, vortex 30 s and use 50 µL.
  2. Equilibrate reagents. Bring reagents and microwells to room temperature (20–25 °C) for at least 30 min. Keep the antibody solution at 4 °C and use it immediately after taking it out. Dilute the 20X wash solution 1:19 with deionized water.
  3. Add standards, samples and antibody. Add 50 µL of standard or prepared sample and 50 µL of antibody solution to each well. Mix gently and incubate 60 min at 4 °C, covered.
  4. Wash. Rinse the wells 4–5 times with 250 µL diluted wash solution, then tap dry on absorbent paper.
  5. Add enzyme conjugate. Add 100 µL per well, incubate 30 min at 25 °C, covered, and wash again.
  6. Develop color. Add 50 µL substrate solution A and 50 µL substrate solution B, then incubate 30 min at 25 °C away from light. Do not exceed 40 min.
  7. Stop and read. Add 50 µL stop solution and read absorbance at 450 nm, preferably 450/630 nm, within 5 min.

Reading Results and Assay Performance

Calculate percent absorbance for each standard and sample as B/B0 x 100, where B0 is the zero standard. Plot percent absorbance against the log of the standard concentrations (ppb), read each sample from the curve and multiply by its dilution factor: 1 for fresh milk, 10 for milk products and 20 for milk powder.

  • Overall sensitivity: 0.2 ppb
  • Detection limits: fresh milk 0.2 ppb, milk products 2 ppb, milk powder 4 ppb
  • Accuracy: fresh milk 85 ± 15%, milk products 90 ± 10%, milk powder 80 ± 15%
  • Precision: CV less than 10%
  • Cross-reactivity: vitamin B12 100%

If the zero standard reads below 0.5 absorbance units at 450/630 nm, the reagents may have degraded.

Frequently Asked Questions

What samples can be tested with this vitamin B12 ELISA kit?

The manual lists fresh milk, milk powder, milk products and grain (maize, soybean, millet, rice). Sample preparation and detection limits are given for the dairy samples.

What is the detection limit?

Overall sensitivity is 0.2 ppb. Because milk products and milk powder are diluted before the assay, their detection limits are higher: 2 ppb and 4 ppb.

How should the kit be stored?

Keep the kit at 2–8 °C and do not freeze it. Storage period is 12 months. Return unused microwells to the zip-lock bag at 2–8 °C. Diluted wash solution keeps for one month at 4 °C.

Can the Vitamin B12 ELISA kit be used for clinical samples?

No. The kit is for research use only and is not for use in diagnostic procedures. The manual covers food samples, not serum, plasma or other clinical specimens.

Do you offer related vitamin assays?

Yes. See the folic acid ELISA kit and the biotin ELISA kit, or build your own assay with the ELISA do-it-yourself development starter kit.

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

size

50 reactions

You may also like…

Shopping Cart