The Attogene Biotin-Vitamin B7 Quantification Kits (EL2021) are a biotin vitamin B7 test kit family for detecting and quantifying biotin in liquid samples. Biotin is widely paired with streptavidin in biological assays, and these kits help you measure free biotin in solution, check biotin attachment after biotinylation, and estimate conjugation efficiency. The kits are offered in lateral flow and ELISA formats and do not require expensive equipment for screening.
Free biotin left over from a biotinylation reaction can interfere with streptavidin-biotin binding in downstream assays. Measuring it helps you confirm that a labeling reaction worked and that the product is ready to use.
Key Features
- Two technologies: choose an ELISA Biotinylation Quantification Kit (EL2021_EL) or a Lateral Flow Biotinylation Detection Kit (EL2021_AU). An EL2021_EZ option is also listed.
- Rapid lateral flow screen: the dipstick reaction is generally complete in 10–15 minutes.
- Competitive streptavidin capture: biotin in the sample competes for a streptavidin test line, so a weaker test line means more biotin.
- Built-in run control: a goat anti-rabbit IgG control line confirms that each strip ran properly.
- No expensive equipment: the lateral flow kit needs only a pipettor, timer and the supplied plate.
- Flexible samples: biotinylated antibodies, free biotin in solution, foods, and plasma or serum for research.
What’s in the Biotin Vitamin B7 Test Kit
Each biotin vitamin B7 test kit in the lateral flow format (EL2021_AU) includes:
- 4.5 mm dipsticks, 50
- Biotin Lateral Flow Running Buffer, 10 mL
- D-Biotin control, 20 µL (store refrigerated)
- 96-well plate, 1
- Manual
Store the kit at 2–30 °C, with strips in the sealed pouch until use. Keep the D-Biotin control refrigerated.
You will also need: a timer, a centrifuge to prepare clear samples, a pipettor and tips, and tubes or a microtiter plate to run the strips. For ELISA kit contents, contact Attogene.
Who It’s For
- Labs biotinylating antibodies, proteins or nucleic acids who want to check labeling
- Assay developers optimizing streptavidin-biotin detection or purification systems
- Lateral flow developers screening reagents before downstream assay development
- Researchers measuring biotin in foods or in plasma and serum samples
How to Use the Lateral Flow Biotin Kit
- Add 150 µL of Biotin Lateral Flow Running Buffer to a well of the 96-well plate for each sample and control.
- Sample: mix in the product to be tested. 1–5 µL is a good starting point; try large dilutions first to find the dynamic range, and keep the volume below 15 µL if possible.
- Positive control: mix in 5 µL of D-Biotin control.
- Negative control: leave the well with buffer only.
- Mix each well completely by pipetting up and down.
- Add one dipstick to each well, arrows facing up, and incubate 10–15 minutes.
- Read the strips and compare each sample with the negative control.
If higher sensitivity is needed, increase the volume or concentration of sample added to the well. See the biotin lateral flow kit manual (PDF) for details.
Reading Results
The higher the biotin concentration in the sample, the lower the test line intensity compared with the negative control strip. The control line intensity should not change with biotin concentration. Read strips at the specified time, as line intensities can vary with drying time. A lateral flow reader can be used for numerical readings.
Frequently Asked Questions
What does the biotin vitamin B7 test kit measure?
It detects and quantifies biotin in liquid samples, including free biotin in solution and biotin on biotinylated antibodies, and can be used to estimate percent biotinylation after a standard biotinylation reaction.
Which format should I choose?
The lateral flow kit is a fast, equipment-light screen with results in 10–15 minutes. The ELISA version of the biotin vitamin B7 test kit is a plate-based quantification format. Contact Attogene to discuss which suits your samples.
Why does a weaker test line mean more biotin?
The assay is competitive. Biotin in the sample competes with the streptavidin test line, so more biotin leaves less signal at the test line.
Can the biotin vitamin B7 test kit be used with food samples?
Yes. The kits are adaptable for detecting biotin in food samples. Validate the method with your matrix.
Is this kit for clinical testing?
No. Plasma and serum can be tested for research purposes only. The kits are not for use in diagnostic procedures.
Related products: Streptavidin Coated ELISA Plates, the Universal LAMP Optimized Lateral Flow Assay Kit (Strep-Gold) and the Universal Lateral Flow Assay Kit (Particles Not Included).
For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.
















