, ,

Congener-Independent Microcystin/Nodularins ELISA Kit (Drinking Water and Ambient Water-Compatible for use with US EPA Method 546)

$564.00

  • Format: 96-well microtiter plate (12 test strips of 8 wells)
  • Standards: 0 | 0.15 | 0.4 | 1 | 2 | 5 ppb
  • Incubation Time: 75 Minutes
  • Compatible for use with US EPA Method 546
564564
Quality Control Spiking Solution
EL2024-Q Supplemental Pack for US EPA Method 546: quality control, calibration verification and spiking solution materials. Recommended for labs reporting under Method 546 or running spike-recovery checks on their water matrix. Not needed for routine screening with this kit.
$108.50
Addons Price: $0.00
Total Price: $564.00
- +

The Congener-Independent Microcystin/Nodularins ELISA Kit (EL2024-05) is a congener-independent microcystin ELISA for quantitative measurement of total microcystins and nodularins in drinking water and ambient water. It is a competitive enzyme immunoassay in a 96-well plate format with a 0.15 ppb (µg/L) detection limit, MC-LR standards from 0 to 5 ppb, and a total incubation time of 75 minutes. The kit is compatible for use with US EPA Method 546.

Microcystin-LR is the most common of more than 50 known microcystin congeners, but blooms produce many variants. A congener-independent assay reports them together, so the result reflects total microcystins.

Key Features

  • Total microcystins and nodularins: broad-spectrum congener detection.
  • Detection limit: 0.15 ppb in drinking water and ambient water.
  • Standard curve: six MC-LR standards at 0, 0.15, 0.4, 1, 2 and 5 ppb.
  • Assay time: 30 + 30 + 15 minutes of incubation, 75 minutes in total.
  • Accuracy and precision: 80 ± 10% accuracy in drinking and ambient water; CV less than 10%.
  • Format: 96-well plate of 12 strips × 8 wells, enough for up to 42 samples in duplicate alongside the standard curve.
  • EPA Method 546: compatible for use with US EPA Method 546, with optional QC materials sold separately.
  • Storage: 2–8 °C, protected from light; 12-month shelf life or until the expiration date.

What’s in the Kit

Each congener-independent microcystin ELISA kit includes:

  • Microtiter plate with 96 wells coated with conjugated microcystin
  • Microcystin-LR standards, 6 vials × 0.8 mL: 0, 0.15, 0.4, 1, 2 and 5 ppb
  • Microcystin Antibody #1, 11 mL
  • 100X HRP-Conjugated Antibody #2, 0.25 mL, and Antibody #2 Diluent, 20 mL
  • 20X Wash Solution, 28 mL
  • TMB Substrate Solution, 12 mL
  • Stop Solution, 14 mL
  • Sample Diluent, 25 mL

You will also need: an ELISA plate reader at 450 nm, distilled or deionized water, methanol, a vortex mixer, a timer, tape or parafilm, a wash bottle, 50 mL and 2 mL polystyrene centrifuge tubes, micropipettes covering 20–200 µL and 100–1000 µL, and a 300 µL multichannel pipette.

Optional add-on: the Quality Control Spiking Solution (Supplemental Pack for Method 546, catalog # EL2024-Q) supplies quality control, calibration verification and spiking solution materials. It can be added to your order on this page.

Who It’s For

This kit suits drinking water utilities, environmental laboratories and researchers who need a quantitative total-microcystin result from drinking or ambient water. Laboratories working to US EPA Method 546 can pair the congener-independent microcystin ELISA kit with the EL2024-Q supplemental pack.

How to Use the Congener-Independent Microcystin ELISA Kit

Run all standards and samples in duplicate, and bring reagents and microwells to room temperature (20–25 °C) for at least 30 minutes before starting.

  1. Prepare samples: make sure each sample is free of particles and at neutral pH. If needed, centrifuge at 3000 g for 5 minutes or filter through a 1.2 µm syringe filter. Test within 24 hours, or store refrigerated for up to 5 days or frozen at -20 °C or below for longer.
  2. Prepare reagents: dilute the 20X Wash Solution 1:20 with deionized water, and freshly dilute the 100X HRP-Conjugated Antibody #2 1:100 in Antibody #2 Diluent.
  3. First incubation: add 50 µL of standard, control or sample, then 100 µL of Antibody #1 to each well. Shake for 30 seconds, cover and incubate 30 minutes at room temperature.
  4. Wash: decant and rinse each well 3 times with 250 µL of 1X Wash Solution, then tap dry on absorbent paper.
  5. Second incubation: add 150 µL of 1X HRP-Conjugated Antibody #2, shake, cover and incubate 30 minutes. Wash again as above.
  6. Develop: add 100 µL of TMB Substrate Solution and incubate 15 minutes at 25 °C, covered.
  7. Stop and read: add 100 µL of Stop Solution and read absorbance at 450 nm within 5 minutes.

Full instructions are in the EL2024-05 kit manual (PDF).

How It Works and Reading Results

Microcystins in the sample compete with microcystin antigen on the plate for the anti-microcystin antibody. More toxin means less bound antibody and a weaker blue color, so absorbance falls as concentration rises.

Express each mean absorbance as a percentage of the zero standard (B/B0 × 100). Plot the standards against concentration on a logarithmic scale and fit a 4-parameter logistic (4PL) curve, manually or with data reduction software. Report samples below the 0.15 ppb standard as less than 0.15 ppb. Samples with lower absorbance than the 5 ppb standard should be diluted with the Sample Diluent, rerun, and multiplied by the dilution factor.

Frequently Asked Questions

Is this kit compatible with US EPA Method 546?

Yes. The congener-independent microcystin ELISA kit is compatible for use with US EPA Method 546. Quality control, calibration verification and spiking solution materials are sold separately in the Supplemental Pack for Method 546 (EL2024-Q).

What does congener-independent mean?

The assay responds to a broad spectrum of microcystin congeners and to nodularins, so the result represents total microcystins rather than microcystin-LR alone.

What samples can I test?

The kit is intended for liquid samples such as drinking water and ambient water. For wastewater, algal cultures or fish, see the Microcystin ELISA Kit (EL2024-02), which has a 0.05 ppb sensitivity.

What if a sample is above 5 ppb?

Dilute it with the included Sample Diluent so the result falls on the standard curve, rerun it, and multiply the result by the dilution factor.

Is there a faster screening option?

For quick field screening, consider the microcystin drinking water test or the rapid recreational water test. If you are also monitoring other cyanotoxins, see the Cylindrospermopsin ELISA Kit. A congener-independent microcystin ELISA remains the choice for quantitative laboratory results.

Not sure which test you need? Read our guide: Microcystin ELISA vs. Rapid Test Strips vs. qPCR: How to Choose a Microcystin Test.

More Microcystin Testing from Attogene

Resources: Quantifying microcystin in water with an ELISA plate reader · Microcystin in drinking water · Microcystin: the toxin produced by harmful algal blooms

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

Type

Main, Add-on

You may also like…

Shopping Cart