Attogene’s Anatoxin-a (ATX) Detection Kit (Rapid – Recreational Water) is a rapid anatoxin-a test kit for screening freshwater recreational water and algae cultures for anatoxin-a, a fast-acting neurotoxin produced by harmful algal blooms (HABs). Each lateral flow test screens at 7 ppb (µg/L) and gives a visual result in 30 minutes. That is the level where many state recreational advisories begin.
Key Features
- Screening level: 7 ppb anatoxin-a. A missing test line indicates ≥ 50 ppb.
- Run time: 30 minutes per test
- Sample types: freshwater recreational water and algae cultures
- Receptor-based detection: uses a patent-pending recombinant nicotinic acetylcholine receptor (nAChR) surrogate, so the test responds to anatoxin-a’s actual mode of action. It is not affected by microcystins.
- Field-ready: everything for sample collection, filtering and testing is included. You only need a timer and a marker.
- Room-temperature storage: store at 2–30 °C
- Format: 10 cassettes = 5 sample tests + 5 negative controls
What’s in the Kit
Each anatoxin-a test kit includes:
- 10 Anatoxin-a lateral flow cassettes (individually foil-pouched with desiccant)
- 5 Water sample bottles (125 mL)
- 5 Sample filters
- 5 Sample dilution buffer tubes
- 5 Negative control tubes
- 5 Syringes (1 mL)
Testing more samples? Sample Dilution Buffer packs (5 or 10 pack) are available as an add-on above.
Who It’s For
- Lake, reservoir and park managers monitoring swimming and boating areas
- State and tribal water quality programs responding to HAB events
- Researchers working with cyanobacteria cultures such as Anabaena and Oscillatoria
- Environmental consultants and labs that need a fast first-pass screen before instrumental analysis
How to Use the Anatoxin-a Test Kit
- Collect water into the 125 mL sample bottle (wear gloves). Bring the sample and kit to room temperature.
- Run the negative control: empty the negative control tube into a cassette and start a 30-minute timer.
- Prepare the sample: draw 1 mL of water, push it through the debris filter into the dilution buffer tube, and mix gently.
- Run the sample: transfer 150 µL to a second cassette and start a 30-minute timer.
- Read: compare the sample’s test line to the negative control’s test line within 5 minutes.
Full instructions are in the AU2062 product insert (PDF).
Reading Your Results
- Test line as dark as or darker than the control’s test line: < 7 ppb
- Test line lighter than the control’s test line: ≥ 7 ppb anatoxin-a
- No test line (control line only): ≥ 50 ppb anatoxin-a
A visible control line is required for a valid anatoxin-a test kit result. For semi-quantitative estimates in the 0–50 ppb range, run anatoxin-a standards alongside your samples. A lateral flow reader such as the Detekt RDS-2500 can provide numerical readouts.
How the Technology Works
Attogene developed a patent-pending lateral flow format built on a stably assembled, recombinantly expressed acetylcholine receptor (AChR). It serves as a surrogate for the human α4β2 and α7 nicotinic acetylcholine receptors and is bound to colloidal gold. The test line carries a specially designed nicotine conjugate. Anatoxin-a in the sample binds the receptor and reduces the test line in a concentration-dependent, isomer-specific way. Microcystins and other non-AChR ligands do not diminish the test line.
Attogene has also shown the test detects AChR-binding toxins in cyanobacteria cultures, including Oscillatoria brevis (UTEX B 1567), Anabaena flos-aquae (UTEX 2557), Anabaena subcylindrica (UTEX LB2382), and Anabaena strains UTEX 2497, UTEX 1611 and UTEX 3013.
What Is Anatoxin-a?
Anatoxin-a, also called Very Fast Death Factor (VFDF), is a bicyclic amine alkaloid cyanotoxin with acute neurotoxicity. It was first identified in Canada in the early 1960s, after cattle died from drinking water that contained a toxic algal bloom, and it was isolated in 1972. Dozens of species of cyanobacteria produce it, and it has been reported on every inhabited continent.
Anatoxin-a mimics acetylcholine at the nicotinic acetylcholine receptor. Symptoms come on quickly and include muscle twitching, loss of coordination, convulsions and, in severe cases, death from respiratory paralysis. Dogs that swim in or drink from affected water are especially at risk.
State Anatoxin-a Thresholds for Recreation
Each state sets its own recreational advisory levels. Most start around 7–15 ppb. The values below are from the EPA’s list of state and tribal toxin thresholds. Check with your state agency for current values.
- CA: Warning 20 ppb, Danger 90 ppb
- CO: Caution 15 ppb, Warning >15 ppb
- IN: Advisory 8 ppb, Prohibited 30 ppb
- MN: Single-tier recreational value 7 ppb
- MT: Tier 2 Caution 20 ppb, Tier 3 Consider Closure >20 ppb
- NJ: Advisory 15 ppb
- OH: Single-tier recreational value 8 ppb
- OR: Single-tier recreational value 15 ppb
- PA: Recreation Advisory >8 ppb, Avoid Primary Contact >300 ppb
- TX: Tier III Danger Advisory 60 ppb
- UT: Warning Advisory >15 ppb, Danger Advisory >90 ppb
- VT: Single-tier recreational value 10 ppb
- VA: Single-tier recreational value 8 ppb
- WA: Danger >300 ppb
- WV: Watch >80 ppb, Warning 300 ppb
- WY: Toxin Advisory 60 ppb
- Confederated Tribes of the Coos, Lower Umpqua, and Siuslaw Indians: 15 ppb
Frequently Asked Questions
How long does the anatoxin-a test take?
Each cassette develops in 30 minutes. Read the result within 5 minutes after that.
What concentration of anatoxin-a does it detect?
The anatoxin-a test kit screens at 7 ppb (µg/L). If no test line appears at all, the sample contains 50 ppb or more.
Is this a quantitative test?
No. It is a qualitative screening test. You can get semi-quantitative estimates by running standards and using a lateral flow reader. Confirm results that may lead to advisories with instrumental analysis such as LC-MS/MS.
Can I test algae cultures?
Yes. The anatoxin-a test kit is intended for both freshwater recreational water and algae culture samples.
Does microcystin interfere with the test?
No. The test line is not diminished by microcystin or other compounds that don’t bind the acetylcholine receptor. To screen for microcystins, use the Microcystin Test Kit (Rapid – Recreational Water).
How should I store samples and the kit?
Store the anatoxin-a test kit at 2–30 °C, with cassettes sealed until use. Refrigerate water samples for up to 5 days, or freeze them for longer storage. Bring everything to room temperature before testing.
What other algal toxin tests do you offer?
Along with microcystin, see our Cylindrospermopsin Rapid Detection Kit. For passive, time-integrated monitoring, try the SPATT Bag Set.
For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.














