,

Carbendazim ELISA Kit

$511.00

This kit can be used in quantitative and qualitative analysis of carbendazim residue in:

  • Honey, Milk, Juice, and Rice
  • Format: 96-well microtiter plate
- +

The Carbendazim ELISA Kit (EL2049-01) is an indirect competitive immunoassay for quantitative and qualitative analysis of carbendazim residue in honey, milk, juice and rice. The 96-well microtiter plate kit has an overall sensitivity of 0.1 ppb, standards from 0 to 8.1 ppb, and needs about 1.5 hours per run, with results read at 450 nm.

Carbendazim is a fungicide used to treat and control fungal diseases, often in combination with other fungicides. Its greatest use is in Europe and Asia, and it is among the pesticides most frequently found in European Union monitoring programs. It is considered a potential endocrine disruptor and is highly toxic to aquatic life. Current EU maximum residue limits for fresh produce range from 0.1 to 0.7 mg/kg depending on the commodity. In the United States, carbendazim is not approved for use on foods, yet it has been found in foods such as imported orange juice, which makes monitoring of food products and water sources important.

Key Features

  • High sensitivity: overall sensitivity of 0.1 ppb.
  • Matrix-specific detection limits: 0.5 ppb for milk, juice and water; 1 ppb for honey; 1 ppb for rice, produce and processed food.
  • Specificity: 100% cross-reactivity with carbendazim and less than 0.1% with benzaldehyde.
  • Spiking standard included: a 1 ppm spiking standard solution for recovery checks.
  • About 1.5 hours: two 30-minute incubations and a short substrate step; kit CV below 10%.
  • Storage: 2–8 °C, do not freeze; 12-month storage period.

What’s in the Kit

Each carbendazim ELISA kit includes:

  • Microtiter plate with 96 wells coated with antigen
  • Standard solutions, 0.8 mL each: 0, 0.1, 0.3, 0.9, 2.7 and 8.1 ppb
  • Spiking standard solution, 1 ppm, 0.8 mL
  • Carbendazim Antibody#1, 11 mL
  • 100X HRP-conjugated Antibody#2, 0.25 mL
  • Antibody#2 Diluent, 20 mL
  • 20X Wash Solution, 28 mL
  • TMB Substrate Solution, 12 mL
  • Stop Solution, 14 mL

You will also need: an ELISA plate reader (450 nm/630 nm), a rotary evaporator or nitrogen drying instrument, vortex mixer, timer, wash bottle, analytical balance, 50 mL and 2 mL polystyrene centrifuge tubes, micropipettes (20–200 µL and 100–1000 µL), a 300 µL multipipette, and deionized water.

Who It’s For

  • Food safety research labs testing juice, honey, dairy and rice
  • Labs monitoring imported produce and juices for fungicide residues
  • Environmental researchers checking water sources
  • Groups that want a sensitive screen before LC-MS or other confirmatory analysis

How to Use the Carbendazim ELISA Kit

  1. Bring reagents and microwells to room temperature (20–25 °C) for at least 30 minutes. Note that the manual asks for the antibody solution to be stored at 4 °C and used immediately after it is taken out, because warm antibody gives high OD values. Prepare 1X Wash Solution (1 part 20X concentrate to 19 parts deionized water) and fresh 1X HRP-conjugated Antibody#2 (1 part to 99 parts Antibody#2 Diluent).
  2. Number the well positions and run all standards and samples in duplicate.
  3. Add 50 µL of standard or sample to each well, then 100 µL of Antibody#1. Shake gently for 30 seconds, cover and incubate 30 minutes at room temperature.
  4. Decant, wash three times with 250 µL of 1X Wash Solution and tap dry on absorbent paper.
  5. Add 150 µL of freshly prepared 1X HRP-conjugated Antibody#2, shake, cover and incubate 30 minutes. Wash three times as before.
  6. Add 100 µL of TMB Substrate Solution and incubate 5–15 minutes at 25 °C, covered.
  7. Add 100 µL of Stop Solution, mix gently and read at 450 nm within 5 minutes.

The complete protocol is in the Carbendazim ELISA Kit Manual (EL2049-01).

How It Works and Reading Results

The wells are coated with a coupling antigen. Carbendazim in the sample competes with this antigen for the antibody, and an enzyme-labeled anti-antibody and TMB substrate then develop the color. Absorbance is inversely related to the carbendazim level.

Express each standard and sample as a percentage of the zero standard (B/B0 × 100%), plot against the log of standard concentration, read sample values from the curve, and multiply by the dilution factor. If no plate reader is available, the manual notes that wells can be compared by eye before the stop solution is added.

Frequently Asked Questions

Which samples can the carbendazim ELISA kit test?

The manual lists honey, milk, juice and rice, and gives detection limits for milk, juice and water, honey, and rice, produce and processed food. Contact us for sample preparation guidance.

What is the detection limit?

Overall sensitivity is 0.1 ppb. Matrix detection limits are 0.5 ppb (milk, juice, water) and 1 ppb (honey; rice, produce and processed food).

What is the spiking standard for?

The 1 ppm spiking standard lets you fortify a blank sample to check recovery in your matrix.

How long does the assay take?

About 1.5 hours per run, including two 30-minute incubations.

How should the kit be stored?

At 2–8 °C; do not freeze. Treated samples can be kept at 2–8 °C in the dark for 24 hours.

Related ELISA Kits

See also the Pentachlorophenol ELISA Kit for the same food matrices, and the Imidacloprid ELISA Kit and Organophosphorus ELISA Kit for other pesticide residues.

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

size

50 reactions

You may also like…

Shopping Cart