, ,

Staphylococcus Enterotoxin B (SEB) Lateral Flow Detection Kit (Colloidal Gold)

$188.00

  • Rapid cassette test for detecting Staphylococcus Enterotoxin B (SEB) in water
  • Detects 10 ppb and greater Staphylococcus Enterotoxin B (SEB) in the sample
  • 5 Sample Dilution Tubes
  • 5 Negative Control Tubes
  • 10 Cassettes
  • 10 Fixed Volume Pipettes
  • Short assay duration

 

 

- +

The Staphylococcus Enterotoxin B (SEB) Lateral Flow Detection Kit (AU2048) is a colloidal gold SEB lateral flow test kit for screening water samples for staphylococcal enterotoxin B. It detects SEB at 10 ppb and greater, uses a simple cassette format with a short assay time, and includes 10 cassettes per kit. It is a lower-cost alternative for labs that need a visual SEB screen without fluorescence equipment.

SEB is a heat-stable enterotoxin produced by Staphylococcus aureus and one of the toxins most often linked to staphylococcal food poisoning. Because it remains active after heating, testing for the toxin itself is a useful complement to bacterial testing.

Key Features

  • Detects 10 ppb and greater: Screens water samples for SEB at low ppb levels.
  • Colloidal gold labels: Results are read visually, with no reader required.
  • Short assay duration: A rapid cassette format with no plate washing steps.
  • Ready to use: Fixed volume pipettes, dilution tubes and negative controls are included.
  • Cost-effective: A lower-cost option than our quantum dot SEB test.

What’s in the Kit

Each SEB lateral flow test kit includes:

  • 10 lateral flow cassettes
  • 10 fixed volume pipettes
  • 5 sample dilution tubes
  • 5 negative control tubes

Who It’s For

  • Water testing labs that want a quick SEB screen.
  • Food safety and QA teams checking process or source water.
  • Researchers who need a simple visual SEB test or a colloidal gold reference for comparison with fluorescent formats.

How to Use the SEB Lateral Flow Test Kit

The kit follows a standard cassette workflow. Always follow the volumes and timing in the instructions supplied with the kit.

  1. Remove a cassette from its foil pouch and label it.
  2. Run a negative control first by applying the negative control to the sample port of a cassette with a fixed volume pipette.
  3. Add your water sample to a sample dilution tube and mix.
  4. Transfer the diluted sample to the sample port of a new cassette with a fresh fixed volume pipette.
  5. Wait for the stated run time, then read the test and control lines by eye.

Reading the Results

A visible control line confirms the cassette ran correctly. Compare the test line of each sample cassette with the negative control cassette run alongside it, as described in the kit instructions. Use reagents from a single kit lot, and run positive and negative controls as good laboratory practice.

Choosing Between Colloidal Gold and QDot SEB Tests

Attogene offers two SEB lateral flow formats. This colloidal gold kit is a visual, lower-cost test for water. The QDot SEB fluorescent lateral flow test (AU2048-01) uses quantum dot labels for higher sensitivity and adds sample preparation for milk and meat rinsate, with optional reader-based analysis.

Frequently Asked Questions

What samples can the SEB lateral flow test kit be used with?

This kit is intended for water samples. For milk or meat rinsate, use the QDot SEB fluorescent test (AU2048-01).

What is the detection level?

The kit detects SEB at 10 ppb and greater in the sample.

Do I need a reader?

No. The colloidal gold lines are read by eye.

How many tests are in a kit?

Each SEB lateral flow test kit contains 10 cassettes and 10 fixed volume pipettes, along with 5 sample dilution tubes and 5 negative control tubes.

Can I use this kit for assay development?

Yes. It can serve as a colloidal gold reference when developing or comparing SEB lateral flow assays. See our lateral flow products for components and related kits.

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

Shopping Cart