The CO0012 75x20mm/63x3mm Cassette is a 75x20mm 3mm strip cassette for narrow lateral flow strips 63mm long by 3mm wide. It is supplied as 500 white housings, each made of a top piece plus a bottom piece, and is intended for both assay development and product launch.
Choose this SKU when your strips are cut to 3mm. Attogene also makes the 75x20mm body for 3.8mm strips (CO0011), so you can match the channel to your cut width while keeping the same outer device size.
75x20mm 3mm Strip Cassette Specifications
- Catalog number: CO0012
- Device length: 75mm
- Device width: 20mm
- Strip length: 63mm
- Strip width: 3mm
- Appearance: White
- Cassette lettering: N/A (no lettering listed)
- Quantity: 500 cassettes per order, top and bottom
- Pouching: Fits into Attogene’s companion foil pouch bags
Typical Uses
Housing a strip in a cassette makes it easier to handle, label and run consistently than a bare dipstick. Labs typically use the CO0012 for:
- Housing 3mm strips for in-house evaluation of a new assay
- Assembling matched test lots for shelf-life or lot-to-lot comparisons
- Small production runs while preparing a product for launch
Compatible Products
- Lateral Flow Cassettes Foil Pouch Bags: rugged, heat-sealable pouches sold 50 per pack and listed as fitting Attogene cassettes.
- CO0011 75x20mm Cassette: the 75x20mm housing specified for 63 x 3.8 mm strips.
- Lateral Flow Cassettes (CO2022): 200 housings per pack for 4.5 x 60 mm strips, if your design uses a wider strip.
- Blank 4.5mm Lateral Flow Strips for LFA Development: development strips listed as compatible with the CO2022 cassettes. At 4.5mm wide they are wider than the 3mm strip the CO0012 is specified for.
Frequently Asked Questions
Which strips fit the 75x20mm 3mm strip cassette?
Strips that are 63mm long by 3mm wide. For 3.8mm strips in the same body size, see the CO0011.
What comes in one order?
Each order of the 75x20mm 3mm strip cassette includes 500 cassettes, with top plus bottom pieces. Foil pouches are a separate product.
Can I order in bulk?
Large quantities are available. Contact sales@attogene.com to discuss volumes.
For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.












