,

Cadmium Ion ELISA kit

$548.00

  • Format: 96-well microtiter plate (12 test strips of 8 wells)
  • Robust, Quantitative, Easy to use
  • LOD (Limit of Detection)=0.5ppb
- +

The Cadmium Ion ELISA Kit (EL2069) is a cadmium ELISA kit for quantitative detection of cadmium ions, with a limit of detection (LOD) of 0.5 ppb, the lowest of Attogene’s three heavy metal ELISA kits. It uses a 96-well microtiter plate supplied as 12 test strips of 8 wells, so you can size each run to the number of samples on hand.

Cadmium enters water and soil from sources such as industrial discharge, mining, batteries and phosphate fertilizers. Like other heavy metals, it is hard to remove by chemical or biological treatment and persists in the environment. Screening on a microplate helps labs measure cadmium across many samples and send only the samples of concern for confirmation.

Key Features

  • Quantitative readout: a cadmium ion concentration for every sample.
  • Sensitive: LOD of 0.5 ppb.
  • Modular plate: 12 test strips of 8 wells in a 96-well frame; run only what you need.
  • Robust and easy to use: a conventional ELISA procedure on standard lab equipment.
  • Batch-friendly: screen multiple samples in a single plate run.

What’s in the Cadmium ELISA Kit

Each cadmium ELISA kit includes:

  • One 96-well microtiter plate, supplied as 12 test strips of 8 wells

The kit instructions list every component with volumes and storage conditions. To see them before ordering, email sales@attogene.com.

You will also need: basic ELISA equipment, such as precision pipettes and a microplate reader. Check the kit instructions for other materials required but not supplied.

Who It’s For

  • Environmental laboratories monitoring cadmium in water
  • Researchers studying heavy metal contamination near industrial, mining or agricultural sites
  • Food and feed research labs exploring cadmium screening (contact us about sample preparation)
  • Any lab that wants to screen many samples before confirmatory instrumental analysis

How to Use the Cadmium ELISA Kit

The cadmium ELISA kit runs as a standard microplate ELISA. Use the kit instructions for exact volumes, incubation times and temperatures.

  1. Prepare samples according to the kit instructions for your sample type.
  2. Remove the 8-well strips you need; store unused strips as directed.
  3. Load the kit standards and samples into the wells.
  4. Perform the incubation and wash steps in order.
  5. Develop the plate and read it on a microplate reader at the stated wavelength.
  6. Determine cadmium ion concentrations from the standard curve.

A downloadable manual is not currently available on this page. Contact sales@attogene.com to request the current instructions for use.

Interpreting and Confirming Results

Quantitative results let you set your own screening cutoffs. As a reference point, the U.S. EPA maximum contaminant level for cadmium in drinking water is 5 ppb (0.005 mg/L); the kit’s 0.5 ppb LOD is well below that. Samples requiring regulatory action should be confirmed by a reference laboratory method, such as ICP-MS.

Cadmium ELISA or Rapid Cadmium Test?

Attogene’s cadmium lateral flow tests are an alternative when speed matters more than throughput. The Cadmium Detection Kit (Rapid – Field Use) is built for on-site testing, and the Cadmium Detection Kit (Rapid – Lab) is a strip test for the bench. The ELISA suits labs that need numeric results across a batch.

For broader heavy metal screening, the Mercury Ion ELISA Kit (EL2067) and the Lead Ion ELISA Kit (EL2068) use the same 12-strip plate format.

Frequently Asked Questions

What is the detection limit of the cadmium ELISA kit?

The LOD is 0.5 ppb.

Is the cadmium ELISA kit quantitative?

Yes. Concentrations are read from the standard curve, giving a number for each sample rather than a pass/fail result.

Can I run a partial plate?

Yes. The plate is made of 12 strips of 8 wells, so you can run only the strips a batch needs. The kit instructions describe how many wells to reserve for standards and replicates.

Which sample types are supported?

Sample preparation depends on the matrix. Contact us to confirm the right preparation for water, food, feed or other samples before ordering.

Do I need to confirm results?

For samples that may require regulatory action, yes. Confirm them with a reference laboratory method.

For research use only. Not for use in diagnostic procedures. Questions? Call 512-333-1330 or email sales@attogene.com.

You may also like…

Shopping Cart